Specification

Model: DLN-24-5
Cage wire quantity: 8/10/12/14/16/18/20/22/24
Ring space: can be set at any value
Cage outer diameter: 100-200mm
Rail length: standard 7m, up to 10m can be customized
Input voltage: 380V(2-phase) or customized
Power frequency: 50/60Hz
Designed max capacity of transformers: 80KVA
Instant power in sync mode: 36KVA
Instant power in async(time-sharing) mode: 18KVA
Transformers: 2sets
Air pressure: 0.6-0.8MPa
Required ir flow: 300L/min
Cooling method: natural cooling
Weight: about 1000KG
Features

Very high welding speed, e.g. for a 12-wire cage, one ring takes only 0.18s
Automatic cage pulling, ring space can be set in the program through the user-friendly interface.
The cage pulling carriage is equipped with bearings, runs on the rail with linear guides, it's smooth and precise
Function of bad weld detection and auto re-welding
Material selection, different welding parameters for mild steel, galvanized steel and stainless steel
Auto compensation gives enough space to insert the ring when the ring distance is short
Ring space precision is 0.1mm; cage pulling speed is 0.4m/s
Rails and material shelf equipped and connected to the machine. The front end of the rail is adjustment-free. Good linearity can be achieved for wire cages
Four air tanks, short air route inside the machine ensures quick response of the cylinders
25mm thick front plate resulted from one-time machining, firmly secure that the welding cylinders are on the same plane and perpendicular to the axes, thus the linearity of the cage can be ensured
Stroke-adjustable cylinders increase welding speed, pre-pressing only takes 0.08s
Equipped with powerful micro-computing unit
Sync/Time-sharing mode can put two transformers work at the same time or one after another, secure good welding quality even when the power supply is not very sufficient